The above output icon flashes and
beeps.
The output exceeds the
standard and it's short-
circuited.
Remove the load, and then short press the switch in
the area corresponding to the icon to remove the
alarm
The temperature warning icon flashes
and beeps.
The temperature of the
product is too high or too
low.
Take the product out of the charging state remove
all loads, turn the power off, wait for the device to
reach a suitable working
temperature, then the alarm is removed.
The icon of connecting to the AC mains
flashes and the product cannot be
charged.
The charging cable is
poorly connected.
The overload protection function is enabled.
To Next Page