To Next PageTo Next Page
Need help?Do you have a question about the Turbo Air TSF-49SD and is the answer not in the manual?
Details on refrigerator and freezer models, including COMP H.P., V/Hz, REFRIGERANT, AMPS, and WEIGHT.
Information on where to find the unit's serial number for service purposes.
Ensuring adequate space around the unit for proper airflow and cooling efficiency.
Locating the unit on a floor capable of supporting its total weight and contents.
Avoiding hot areas like stoves to maintain optimal cooling performance.
Emphasizing that the unit is designed for indoor use and must be protected from moisture.
Ensuring the unit is stable by locking wheels and is level for proper function.
Cleaning the unit's surfaces with warm water and soap, avoiding abrasive cleaners.
Periodically cleaning condenser fins to maintain refrigeration performance, ideally every three months.
Regularly cleaning door gaskets to ensure proper sealing and efficiency.
Performing safety checks and verifying proper operation after cleaning the unit.
Ensuring correct voltage and amperage for the power cord, and turning off power for maintenance.
Waiting 5 minutes before restarting the unit after disconnection.
Powering on the unit via the switch, with display and compressor activation.
Understanding the unit's default temperature setting for initial operation.
Explanation of automatic compressor and defrost cycle control by sensors and PCB.
Guidance on adjusting temperature levels using numbered settings from '1' to '9'.
How the interior light activates and evaporator fan motor operates based on door status.
Diagram and labels illustrating the refrigerator's display panel functions and indicators.
Activating Turbo Cooling for rapid temperature reduction and its limitations.
Setting the inside temperature level using up/down buttons and their function during Turbo Cooling.
Function of the display to show current internal temperature and its range.
The fan running indicator illuminates when the fan motor is active.
Indicator activation and warning beeps for doors left open, ceasing upon closure.
Powering on the unit via the switch, with display and compressor activation.
Understanding the unit's default temperature setting for initial operation.
Explanation of automatic compressor and defrost cycle control by sensors and PCB.
Guidance on adjusting temperature levels using numbered settings from '1' to '9'.
How the interior light activates and evaporator fan motor operates based on door status.
Importance of good air flow and careful product loading to avoid blocking the evaporator.
Diagram and labels illustrating the freezer's display panel functions, indicators, and buttons.
Initiating and exiting manual defrost mode using the dedicated button.
Setting the inside temperature level using up/down buttons.
Description of the factory-set automatic defrost cycle and its indicators.
Displaying the current internal temperature and its range (-50°F to +50°F).
The fan running indicator illuminates when the fan motor is active.
Indicator activation and warning beeps for doors left open, ceasing upon closure.
Addressing issues where the freezer is melting food, with causes and solutions.
Troubleshooting the unit not refrigerating at all or not refrigerating well.
Resolving issues related to loud noises, exterior/interior dewdrops, and door closure.
Clarifying normal sounds like refrigerant flow and compressor operation during defrost.
Covers cabinet and parts for three years from installation or 39 months from shipment.
Extends compressor warranty for two additional years, up to five years and three months from shipment.
Specific procedures for compressor warranty, including lubricant and vacuum requirements.
Exclusions such as transferability, consequential damages, and misuse.
Clarification that only stated warranties apply, excluding implied warranties.
Details on who covers transportation costs and information required for warranty claims.
All claims must be made directly through Turbo Air with specific required information.
Details on coverage for parts and labor, including standard straight time labor charges.
Coverage for hermetically sealed compressor parts and limitations.
Specific conditions for compressor warranty, including lubricant, drier, and vacuum requirements.
General| Model | TSF-49SD |
|---|---|
| Brand | Turbo Air |
| Horsepower | 1/4 HP |
| Energy Source | Electric |
| Voltage | 115 V |
| Exterior Material | Stainless steel |
| Door Type | Solid Door |
