Need help?Do you have a question about the Turbo Economiser E2T and is the answer not in the manual?
General| Brand | Turbo |
|---|---|
| Model | Economiser E2T |
| Category | Controller |
| Language | English |
Guidelines on device placement, cable selection, wiring, and safe electrical procedures.
Precautions against misuse, tampering, and actions to take if water is detected.
Configuration for operation mode (F01), valve activation time (F02), pause time (F03), outputs (F04), and voltage (F05).
Settings for dP thresholds (F07-F10), fan recognition mode (F11), and fan dP threshold (F12).
Alarms E09-E11 for maximum dP, sensor offset, and maintenance deadlines.
Details on Manual (F01=0) and Automatic (F01=1) modes of operation.
Explanation of Proportional Mode (F01=3), Cleaning with Fan Off (PCC), and output selection.
Procedures for Precoating Function (F18=1), dP Zero Calibration (F07), and Sensor Self-Calibration.
Diagram illustrating all terminal connections on the main control board.
Detailed list of main board terminals and their corresponding descriptions/functions.
List of terminals used on the expansion boards for various channel configurations.
Diagrams showing the external dimensions and physical views of the economizer unit.
A table listing the default set values for all configurable functions (F01-F26).
Troubleshooting steps for cleaning cycle problems, alarm activation, and unexpected device resets.
To Next Page
