Turbosound LMS-D6 - System and Interface Settings; System Sub-Menu Options; Interface and AES;EBU Configuration

To Next Page

To Previous Page

user manual

LMS-D6

LMS-D6 user manual

Page 10

System Sub-Menu

System Sub-MenuSystem Sub-Menu

System Sub-Menu:

System Status:

Displays unit information including software version and temperature.

LCD Contrast:

Adjusts LCD contrast.

LED Brightness:

Adjusts LED brightness.

Temperature Alarm:

Sets a temperature warning value in Centigrade.

Wake-up Time:

Sets whether or not the unit starts up in mute.

Output Meters:

Selects output meters to be pre or post mute.

Filter Q or BW:

Selects whether Q or bandwidth is displayed in the parametric screens.

Interface Sub-Menu

Interface Sub-MenuInterface Sub-Menu

Interface Sub-Menu:

Interface Setup:

Selects baud rate

AES / EBU Sub-Menu

AES / EBU Sub-MenuAES / EBU Sub-Menu

AES / EBU Sub-Menu:

Routing options:

Selects various routing options.

AES diagnostics:

Shows the complete status of the input AES signal. Available only if the AES

option is fitted.

(For more in-depth information on menu functions, refer to pages

(For more in-depth information on menu functions, refer to pages (For more in-depth information on menu functions, refer to pages

(For more in-depth information on menu functions, refer to pages 17

1717

17, 17 &

, 17 & , 17 &

, 17 & 18

1818

18.)

.).)