10 NuQ-AN Series Quick Start Guide 11
(1) LCD SCREEN displays the current DSP module and parameter settings.
(2) SETUP button steps through parameters within DSP processing modules.
(3) PROCESS button steps through the DSP processing modules.
(4) AUDIO LINK XLR connector provides an un-processed copy of the AUDIO INPUT signal.
(5) AUDIO INPUT combo jack accepts input signals using XLR, balanced ¼" TRS or unbalanced ¼"TSconnectors.
(6) POWER switch turns the unit on and o .
(7) AC INPUT accepts power connections from power cables tted with Neutrik powerCON twist-lockingconnectors.
(8) ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
(9) EXIT button returns to the top-level DSP screen when pressed.
(10) ENTER button saves changes and deactivates Edit mode when pressed.
(11) ULTRANET THRU sends out unprocessed digital audio from the ULTRANET IN connector to additional ULTRANET-equipped devices.
(12) USB connection enables rmware updates and remote control over parameters via computer. Pleasevisit turbosound.com to download DSP control software for
your computer.
(13) ULTRANET IN RJ45/Neutrik etherCON jack for connection to additional ULTRANET-equipped devices.
Networking capability
All NuQ-AN powered loudspeakers o er remote control via USB. The USB connection allows the user to con gure and monitor all DSP parameters using dedicated
software for PC.
The DSP rmware can also be updated via the USB connection. Visitturbosound.com for the latest rmware version.
NuQ-AN speakers also o er proprietary ULTRANET networking capabilities through the ULTRANET IN and ULTRANET THRU connections using CAT5 cables with RJ45
connectors. ULTRANET allows the user to transmit unidirectionally up to 16 independent channels of 24-bit audio throughout the NuQ-AN system, aswell as other
ULTRANET-equipped devices such as digital mixers and personal monitor systems. Upto7devices can be connected in series on a single ULTRANET cable.
To Next Page
Loading...
