Need help?Do you have a question about the Turbosound Miln series and is the answer not in the manual?
General| Brand | Turbosound |
|---|---|
| Model | Miln series |
| Category | Speakers |
| Language | English |
Covers warnings about electric shock, fire, and general operational safety guidelines.
States that technical specifications and appearances are subject to change without notice.
Directs users to the website for applicable warranty terms and conditions.
Congratulates the user and thanks them for choosing the TURBOSOUND loudspeaker product.
Instructs users to check for damage after unpacking and notify the carrier promptly.
Lists the specific Milan loudspeaker models covered by this Quick Start Guide.
Details connecting microphones and line sources to the integrated mixer.
Explains setting up a stereo PA using two loudspeakers with an external mixing console.
Details connecting to subwoofers and Milan mid/high loudspeakers for extended frequency response.
Describes setting up a monitor system for performers using powered wedge monitors.
Details mains power connection via IEC connector and the rocker switch operation.
Explains combo XLR/jack connectors for various audio sources.
Describes the balanced line level output for connecting to other loudspeakers.
Details the program switch and treble tone control functions.
Explains bass control and the function of Power, Signal, and Limit LEDs.
Details front LED status options and the mic/line input selection.
Describes the rotary level control for input signal attenuation.
Details mains power, fuseholder, switch, and input connectors for subwoofers.
Explains thru connections for loop-through signals and the boost function.
Details subwoofer LEDs, polarity, level, and boost frequency controls.
Provides step-by-step instructions for initial setup of M10, M12, and M15 models.
Provides step-by-step instructions for initial setup of M15B and M18B subwoofers.
Explains how to achieve improved bass response by adding subwoofers.
Offers recommendations for using the loudspeaker as a floor monitor.
Illustrates wiring for XLR and jack connectors for various audio sources.
Offers advice on positioning to avoid feedback and enhance coverage.
Details how to use the M10 rigging points for permanent installation.
Describes how to wall mount the loudspeaker using a compatible bracket.
Provides critical safety instructions for qualified personnel regarding flown systems.
Lists common faults, their checks, and recommended actions for resolution.
Provides detailed technical specifications for all Milan models in a comparative format.
Lists available spare parts and accessories for the Milan series loudspeakers.
Guides users on online registration, malfunction handling, and power connection.
Provides guidance for handling malfunctions and seeking online support.
Advises on correct power connection and voltage for the unit.
Details the FCC compliance statement for the Milan series devices.
To Next Page