user manual
QLight series
In general, the more powerful the amplifier, the better it will sound, provided that it is not driven
into sustained clipping. It should be understood that overdriving an insufficiently powered
amplifier is more likely to cause loudspeaker damage – the total energy in a heavily clipped signal
is far higher than in an unclipped signal – than operating a more powerful amplifier within its
ratings.
One loudspeaker management system can be used to feed several amplifiers as long as all the
amplifiers are the same (or have the same gain ratings). More than one loudspeaker management
system may be required if the amplifiers are of different gain or type. Please contact your dealer if
you require help in this area.
TQ-300 series manual
page 8
To Next Page
Loading...
Need help?
General
