user manual
TL series
TL series manual
page 5
PRODUCT RANGE SUMMARY
TL-1201
The TL-1201 is a compact trapezoidal passive two-way loudspeaker
enclosure designed for use in a wide variety of live sound
applications as well as in fixed installations ranging from cafes,
pubs, bars and restaurants to retail stores and houses of worship.
It consists of a 12” reflex-loaded low frequency driver and a 1” high
frequency compression driver in an optimally tuned, birch plywood
enclosure. These high-grade components are matched with an
internal second order passive crossover network.
Its wide dispersion pattern of 70
°
H x 40
°
V enables a variety of foreground sound applications,
including use as a delay speaker in distributed sound reinforcement system.
Two Neutrik Speakon NL4MP connectors provide input and loop in / loop out connections to the
enclosure. Internal threaded rigging points provided on the top and back are designed for use with
optional M10 shoulder eyebolts for rigging single enclosures in fixed installations. An integral
35mm pole mount is fitted for use with standard tripods and poles.
TL-1501
The TL-1501 is a trapezoidal passive two-way loudspeaker
enclosure designed for use in a wide variety of live sound
applications as well as in fixed installations ranging from
cafes, pubs, bars and restaurants to retail stores and houses of
worship.
It consists of a 15” low frequency driver and a 1” high
frequency compression driver in an optimally tuned, birch
plywood enclosure. These high-grade components are
matched with an internal second order passive crossover
network. The TL-1501 is designed to provide wide horizontal
coverage (70
°
H x 40
°
V) making it suitable for use in a variety of
foreground sound applications, including use as a delay speaker in distributed sound
reinforcement system.
Two Neutrik Speakon NL4MP connectors provide input and loop in / loop out connections to the
enclosure. Internal fixing points provided on the top and back can be used with optional M10
shoulder eyebolts for rigging single enclosures in fixed installations. An integral 35mm pole
mount is fitted for use with standard tripods and poles.
To Next Page
Loading...
Need help?
General
