support@turbro.com www.turbro.com
Tips for First-Time Use
1. Allow the unit to sit upright for at least 3-4 hours before powering on. Shipping carriers may set the unit on
its side, which causes the refrigerant to pool in certain areas. Standing the unit upright for 3-4 hours allows
the refrigerant to move freely within the coils.
2. Some parts with sharp edges may cause injury, so gloves are highly recommended for unpacking and
installing.
3. If you have any difficulties during installation, please contact our Customer Support Team via
support@turbro.com for help.
4. If you have any problems with your product, please send us an email before submitting a return request, as
there might be a simple solution for your issue.
Please read this user manual carefully before installing and operating the unit.
Caution: Risk of fire
Before using the appliance, read the owner's manual first.
Before installing the appliance, read the installation manual first.
Before repairing the appliance, read the service manual first.
The figures in this manual may be different from the material objects, please refer to the material objects for
reference.
1. Do not use means to accelerate the defrosting process or to clean, other than those recommended by the
manufacturer. Should repair be necessary contact the TURBRO Customer Service Team.
2. Any repairs carried out by unqualified personnel may be dangerous.
3. Do not pierce or burn refrigerant lines or any other components.
4. Read the user manual in its entirety before beginning installation or operation.
Caution, risk of fire
To Next Page
Loading...
