TURBRO GL9K115 - User Manual

Questions and Answers

Z
Zachary BrownAug 11, 2025
What to do if my TURBRO GL9K115 does not operate?
- A
  annafitzgeraldAug 11, 2025
  If your TURBRO Air Conditioner isn't working, here are some things to check: * Ensure the power cord is securely plugged into the wall outlet. * If a delayed start-up time has been set, cancel the TIMER function. * The unit may have stopped to protect itself; wait 30 minutes. If it still doesn't work, contact TURBRO customer service. * Verify that the supply voltage is stable and within the rated range. * If you suspect a damaged control board or fan motor, contact TURBRO customer service.
A
Adriana MyersAug 19, 2025
Why is my TURBRO Air Conditioner not responding to commands?
- S
  Steven PerkinsAug 19, 2025
  If your TURBRO Air Conditioner isn't responding to commands, try these steps: 1. Make sure the remote control is close enough to the indoor unit. 2. Replace the remote's batteries with two new AAA (1.5V) batteries. 3. Remove any obstacles between the remote control and the signal receiver on the indoor unit.
K
Kelly PowersAug 27, 2025
What to do if there is insufficient airflow from my TURBRO Air Conditioner?
- R
  Reginald DavisAug 27, 2025
  If you're experiencing insufficient airflow (hot or cold) from your TURBRO Air Conditioner: * Clean the air filter, as it may be blocked by dust. * Adjust the temperature setting and mode to a more suitable level. * Remove any heat sources from the room. * Ensure all doors, windows, and curtains are closed. * If the unit is low on refrigerant, contact qualified professionals to refill it.
K
kathrynhoffmanSep 3, 2025
Why my TURBRO Air Conditioner produces a gurgling sound?
- T
  Tiffany JacksonSep 3, 2025
  If your TURBRO Air Conditioner produces a gurgling sound just after being turned on, this is due to the backflow of liquid in the refrigerant circulation.