A4 – 4 /1105 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • D-45472 Mülheim an der Ruhr • Tel. +49 208 4952-0 • Fax +49 208 4952-264 • www.turck.com
7/8“-Durchführung, Stecker, Kupplung, 1 x 7/8" (F060)
1 x 7/8" (F065)
RSF-RKF-57/22 6602218
Lochmaß 22,5 mm, Nennstrom: 9 A
7/8" feed-through connection,
male, female, hole diameter 22.5 mm,
Rated current: 9 A
Lötbarer 7/8“-Flanschstecker, 1 x 7/8" (F060) RSF57 6602342
Nennstrom: 9 A
Solderable male 7/8" flange connector,
Rated current: 9 A
Lötbare 7/8“-Flanschkupplung, 1 x 7/8" (F065) RKF57 6602217
Nennstrom: 9 A
Solderable female 7/8" flange connector,
Rated current: 9 A
Abmessung Anwendung Verbindungs-
technik
Typenbezeichnung Ident-Nr.
Dimensions Application Connection Type Ident-no.
[mm] Fig. (Fxxx)
49.2
32.7
7/8-16UN
7/8-16UN
locknut
lockwasher
sealing gasket
thrust washer
26,5
10
7,5
ø 25,4
7/8-16UN
1/2-14 NPT
26
19,5
10
ø 25,4
1/2-14 NPT
26
7/8-16UN
Durchführungen/Flansche für Versorgungskabel, Typ 52
Feed-through Recept./Flange Connect. for Power Cables, Type 52
( F060 ) ( F065 )
Anschlussbelegung
Pin Configuration
3
4
5
2
1
1 = Shield
2 = V +
3 = V
4 = CAN_H
5 = CAN_L
3
4
5
2
1
1 = Shield
2 = V +
3 = V
4 = CAN_H
5 = CAN_L