Need help?Do you have a question about the turck FGEN-AIM Series and is the answer not in the manual?
General| Product Series | FGEN-AIM |
|---|---|
| Category | I/O Systems |
| Input Type | Analog |
| Protection Class | IP67 |
| Number of Outputs | 0 |
Explains the manual's structure and content, covering technical data, function, and device handling.
Defines symbols like Warning, Attention, and Note for user guidance.
Covers prescribed use, transport, storage, and installation notes.
Details changes and revisions made in the manual compared to previous editions.
Provides detailed technical specifications including power, connectors, size, and protection class.
Details Ethernet connections and operating/load voltage supply.
Explains various methods for assigning device addresses like rotary-mode, BootP, and DHCP.
Describes accessing and configuring the device via its web server interface.
Covers I/O and Explicit Messages, and communication types like Unicast and Cyclic Connection.
Explains the QuickConnect function for fast device connections.
Details standard CIP classes and objects like Identity, Assembly, and TCP/IP Interface.
Explains the Modbus protocol and its implementation over TCP/IP.
Maps registers to station data, parameters, and diagnostics.
Defines output behavior during Modbus communication failure.
Details the prioritized startup feature for PROFINET devices.
Lists channel-specific diagnostic error messages and their meanings.
Covers general module and I/O channel parameters for PROFINET.
Covers cable grouping, routing inside/outside cabinets, and lightning protection.
Discusses EMC requirements, grounding, and shielding for system compatibility.
Provides guidance on using and connecting cable shields for interference prevention.
Instructions for changing PC IP address in Windows and via I/O-ASSISTANT.
Guidance on deactivating or adapting the Windows Firewall for network access.
To Next Page
