D301271 1013 - FGEN - multi protocol
10-3
Network configuration
10.2 Network configuration
FGEN-stations are delivered in the address-mode "PGM-DHCP", switch-position "600" and can be
reached using IP-address 192.168.1.254 .
To achieve this, you have either
to adjust the FGEN‘s IP address via BootP, DHCP etc. for integrating it into your own network (for
detailed information about the different possibilities for address setting, please read chapter 3,
Connection possibilities, page 3-6.
or
to change the IP address of the used PC or network interface card (for detailed information, please
read the Changing the IP address of a PC/ network interface card, page 14-2.
Note
In order to build up the communication between the FGEN-station and a PLC/ PC or a network
interface card, both devices have to be hosts in the same network.
To Next Page
Loading...
