FGEN – general technical properties
D301271 1013 - FGEN - multi protocol3-12
3.5.9 Addressing via I/O-ASSISTANT 3 (FDT/DTM)
The software-tool I/O-ASSISTANT enables direct access to the Ethernet-network via the Ethernet cable.
The IP address, as well as the subnet mask of the TURCK Ethernet stations, can be changed according
to the application by using the Busaddress Management function of the BL Service Ethernet interface
(TCP/IP) in the software I/O-ASSISTANT.
Figure 3-7:
BL Service
Ethernet
To Next Page
Loading...
