turck FGEN-AIM Series - Register 100 Ch: Station Status

Implementation of Modbus TCP
D301271 1013 - FGEN - multi protocol9-16
9.3.3 Register 100Ch: "Station status"
This register contains a general gateway/ station status.
Table 9-7:
Register 100Ch:
Station status
Bit Name Description
Station
15 - -
14 FCE The Force Mode is activated, which means, the actual
output values may no match the ones defined and sent by
the field bus.
13 - -
12 - -
Module bus
11 CFG I/O configuration error
10 COM Communication on the internal module bus disturbed.
Voltage errors
9U
B
System supply voltage too low (< 18 V DC).
8- -
7U
L
Load voltage too low (< 18 V DC).
6- -
5- -
4 - -
Warnings
3- -
2- -
1- -
0 DiagWarn Diagnostic messages are available.