turck FGEN-AIM Series - Meaning of the Register Bits

D301271 1013 - FGEN - multi protocol
9-15
Modbus registers
Meaning of the register bits
Table 9-6:
Meaning of the
register bits
Name Meaning
I/O-data
DIx DI = digital input
DOx DO = digital output
Cx C = connector
Px P = Pin
Diagnostics
DiagWarn See Register 100Ch: "Station status" (page 9-16)
U
B
U
L
COM
CFG
FCE
I/O Diag Summarized diagnostic message of
I/Os
SCSx Short circuit at sensor supply of the respective channel
SCOx Short circuit at output of the respective channel
Parameters
Inv. DIx The input signal at the respective channel is inverted.
SROx 0 = activated
A
The output switches on automatically after an overload.
1 = deactivated
The output is manually switched-off and on again.
EN DOx Deactivates or resp. activates the output at the respective connector
of the device.
0 = deactivated
1 = activated
A