turck FGEN-AIM Series - Parameters; Diagnostic Message of I;O-Channels

D301271 1013 - FGEN - multi protocol
4-3
FGEN-IM16-x001
4.1.3 Parameters
Further information about the parameter data mapping can be found in the fieldbus specific chapters.
 EtherNet/IP™: chapter 7.4.4, Digital Versatile Module Class (VSC117) (page 7-34) ff.
 Modbus TCP: chapter 9.3.2, Register mapping of the FGEN-stations (page 9-11) ff.
 PROFINET: chapter 11.4, Parameters (page 11-5)
4.1.4 Diagnostic message of I/O-channels
Further information about the diagnostic data mapping can be found in the fieldbus specific chapters.
 EtherNet/IP™: chapter 7.4.4, Process Data Class (VSC102) (page 7-31)
 Modbus TCP: chapter 9.3.2, Register mapping of the FGEN-stations (page 9-11) ff.
 PROFINET: chapter 11.3, PROFINET-Error Codes (page 11-4)
Table 4-2:
Parameters
Parameter name Value Description
A default
setting
Digital input
(Inv. DIx)
0 = normal A
1 = inverted Inverts the digital input signal.
Table 4-3:
Diagnostic
messages
Diagnostics Description
SCSx Short circuit at sensor supply of the respective channel