turck FGEN-AIM Series - Deactivating; Adapting the Firewall in Windows

D301271 1013 - FGEN - multi protocol
14-5
Deactivating/ adapting the firewall in Windows
14.2 Deactivating/ adapting the firewall in Windows
When using the Windows Firewall, problems may occur while changing IP addresses
via the I/O-ASSISTANT. In this case, you can deactivate the system integrated Windows firewall com-
pletely or adapt it to your application.
 Deactivating the Windows firewall
Open the "Windows Firewall" dialog in the control panel of your PC and
deactivate it as follows:
Figure 14-4:
Deactivating
the Firewall in
Windows 2000/
XP
Figure 14-5:
Deactivating
the Firewall in
Windows 7