turck FGEN-AIM Series - Diagnostics with Step 7; Diagnostic Messages in the Hardware Configuration

Application example: FGEN for PROFINET with a Siemens S7
D301271 1013 - FGEN - multi protocol12-18
12.1.12 Diagnostics with Step 7
Diagnostic messages in the hardware configuration
The FGEN-stations for PROFINET show gateway diagnostics and channel-specific module diagnostics in
the hardware configuration of the Step 7-software.
Furthermore a special help text, which clearly specifies the error, is given for each diagnostic message:
Figure 12-20:
Diagnostics
A channel specific
station
diagnostics
B manufacturer
specific help
texts
B
A