turck FGEN-AIM Series - Addressing Via PGM-DHCP; SET-Button; Device Configuration Files

D301271 1013 - FGEN - multi protocol
3-15
SET-button
3.5.10 Addressing via PGM-DHCP
The device's network settings can be changed under "Network Configuration" only by users having
administrator rights.
Further information concerning the web server of the FGEN-devices and it's use can be found under
Web server - remote access/configuration (page 3-16).
3.6 SET-button
Pushing the SET-button causes a device-restart.
3.7 Device configuration files
The actual device configuration files for the stations can be downloaded from the TURCK-home page
www.turck.com.
Note
The access of the IO-ASSISTANT to the station is only possible, if the station already has an IP-
address and if it is operated in switch position 500 = PGM or 600 = PGM-DHCP-mode (see also
Address assignment (page 3-8)).
Figure 3-11:
Web server with
Network
Configuration