FGEN – general technical properties
D301271 1013 - FGEN - multi protocol3-14
Note
The access of the IO-ASSISTANT to the station is only possible, if the station already has an IP-
address and if it is operated in switch position 500 = PGM or 600 = PGM-DHCP-mode (see also
Address assignment (page 3-8)).
Note
When using Windows XP as operating system, difficulties may occur with system-integrated
firewall.
It may inhibit the access of PACTware™ (I/O-ASSISTANT V3) to the Ethernet-network. In this
case, please adapt your firewall respectively or deactivate it.
Figure 3-10:
Specify IP
address
change
To Next Page
Loading...
