turck FGEN-AIM Series - Web Server - Remote Access;Configuration; IP Address

FGEN – general technical properties
D301271 1013 - FGEN - multi protocol3-16
3.8 Web server - remote access/configuration
3.8.1 IP address
Open the web server by entering the device's IP-address in your web browser.
IF no IP-address is assigned to the device (DHCP-, BootP-server etc.), then the web server can be opened
using the default IP-address 192.168.1.254.
Note
When working with the webserver of the module, it should be assured, that the browser
always reloads the HTML-pages from the module‘s webserver (forced reload). The data
should not be loaded from the browser‘s cache memory.
This guarantees that the data to be shown are always acutal (module type, module status
etc.).
Short-cuts for browser:
Internet Explorer: Shift + F5
Mozilla Firefox: Ctrl + F5
Figure 3-12:
Web server of
the FGEN-
station