turck FGEN-AIM Series - Identity Object (0×01)

D301271 1013 - FGEN - multi protocol
7-7
Classes and Instances of the EtherNet/IP™-stations
7.3.2 Identity Object (0×01)
The following description of the Ethernet Link Object is taken from the CIP specification, Vol. 2, Rev. 2.1
by ODVA & ControlNet International Ltd. and adapted to FGEN.
Class Attributes
Instance attributes
Table 7-2:
Class Attributes
Attr. No. Attribute name Get/
Set
Type Value
1 (0×01)
REVISION G UINT 1
2 (0×02)
MAX OBJECT INSTANCE G UINT 1
6 (0×06)
MAX CLASS ATTRIBUTE G UINT 7
7 (0×07)
MAX INSTANCE ATTRIBUTE G UINT 7
Table 7-3:
Instance
attributes
Attr. No. Attribute name Get/
Set
Type Description
1 (0×01)
VENDOR G UINT Contains the vendor ID.
TURCK = 48
2 (0×02)
PRODUCT TYPE G UINT Indicates the general type of product.
Communications Adapter
12
dez
= 0×0C
3 (0×03)
PRODUCT CODE G UINT Identifies a particular product within a device
type.
Default: 27247
dec
= 6A6F
4 (0×04)
REVISION
Major Minor
G STRUCT
OF:
USINT
USINT
Revision of the item the Identity Object is
representing.
0x01
0x06
5 (0×05)
DEVICE STATUS G WORD See Table 7-4: Device Status
6 (0×06)
SERIAL NUMBER G UDINT Contains the ident-no. of the product (3 last
bytes of the MAC-ID).
7 (0×07)
PRODUCT NAME
LENGTH
NAME
G STRUCT
OF:
USINT
STRING
[13]
e. g.:
FGEN-XSG16-5001