turck FGEN-AIM Series - 12 Application Example: Fgen for Profinet with a Siemens S7

D301271 1013 - FGEN - multi protocol 12-1
12 Application example: FGEN for PROFINET with a Siemens S7
12.1 Application example................................................................................................................................12-2
12.1.1 General.............................................................................................................................................................................................. 12-2
12.1.2 Example network .......................................................................................................................................................................... 12-2
12.1.3 New project in the Simatic Manager...................................................................................................................................... 12-3
12.1.4 Setting the PG/PC-interface ...................................................................................................................................................... 12-3
12.1.5 Installation of the GSDML-files................................................................................................................................................. 12-4
12.1.6 Adding PROFINET network nodes .......................................................................................................................................... 12-7
– Adding and configuring of FGEN-stations....................................................................................................................... 12-8
12.1.7 Scanning the network for PROFINET nodes ......................................................................................................................12-10
12.1.8 Name assignment for FGEN-stations ...................................................................................................................................12-11
12.1.9 PROFINET-neighborhood detection (LLDP) ......................................................................................................................12-12
– Necessary setting of the PROFINET-controller .............................................................................................................12-12
– Configuring the neighborhood detection.....................................................................................................................12-13
12.1.10 Online topology detection ......................................................................................................................................................12-15
12.1.11 Fast Start-Up - configuration of fieldbus nodes...............................................................................................................12-16
– Prioritized stat-up - activation at PN-IO ..........................................................................................................................12-16
– Setting the Ethernet-Ports (Port 1 and Port 2)..............................................................................................................12-17
12.1.12 Diagnostics with Step 7 ............................................................................................................................................................12-18
– Diagnostic messages in the hardware configuration ................................................................................................12-18