Appendix
D301271 1013 - FGEN - multi protocol14-4
14.1.2 Changing the IP address via I/O-ASSISTANT V3
The Busaddress Management DTM in the software I/O-ASSISTANT (access via: "Additional functions →
Busaddress Management") offers the possibility to browse the whole Ethernet network for connected
nodes and to change their IP address as well as the subnet mask according to the application.
For further information concerning this issue, please read Addressing via I/O-ASSISTANT 3 (FDT/DTM)
(page 3-12)).
Figure 14-3:
Busaddress
Management
To Next Page
Loading...
