turck FGEN-AIM Series - Adding PROFINET Network Nodes

D301271 1013 - FGEN - multi protocol
12-7
Application example
12.1.6 Adding PROFINET network nodes
The nodes of the example network (see page 12-2) are added to the PROFINET as follows:
 Siemens-switch
– Device name: SCALANCE-X202-2P
– IP address: 192,168,144,166
 ET200S
– Device name: ET200-S
– IP address: 192,168,144,188
Figure 12-8:
Add new
Ethernet subnet
Figure 12-9:
Add network
node