turck FGEN-AIM Series - Object Instance 3, Diagnostic Instance

Implementation of EtherNet/IP™
D301271 1013 - FGEN - multi protocol7-32
Object instance 2, standard output process data (compressed)
Object Instance 3, diagnostic instance
Table 7-26:
Object instance 2,
standard output
process data
(compressed)
Attr. No.
dec. (hex.)
Attribute name Get/
Set
Type Description
100 (64h) Max object
attribute
GUSINTContains the number of the last object
attribute to be implemented.
101 (65h) Attribute list GARRAY OF
USINT
List of all attributes that are supported by
this Instance.
102 (66h) Packed process
input data
G/S ARRAY OF
WORD
Output process data, 16-bit aligned,
compressed.
103 (67h) Process data byte
count
GUSINTThe number of bytes that are exchanged
with this Instance.
Table 7-27:
Object Instance 3,
diagnostic
instance
Attr. No.
dec. (hex.)
Attribute name Get/ Set Type Description
104 (68h) GW
summarized
diagnostics
G/S BOOL 0 = disabled
1 = enabled: 1 bit of diagnosis mapped at
the end of the input data image (page
7-36).
Changes become valid after a start-up!
105 (69h) GW
manufacturer
specific
diagnostics
(scheduled
diagnostics)
G/S BOOL 0 = disabled
1 = used for activating the mapping of the
channel-specific diagnostic bits to the
process input data page 7-36.
Changes become valid after a start-up!
106 (6Ah) reserved -