turck FGEN-AIM Series User Manual

Application example: FGEN for PROFINET with a Siemens S7
D301271 1013 - FGEN - multi protocol12-2
12.1 Application example
12.1.1 General
In order to configure the connection of FGEN-stations for PROFINET to a Siemens PLC S7, the software
package "SIMATIC Manager" version 5.5 from Siemens is used.
12.1.2 Example network
 Siemens PLC S7, CPU 315-2 PN/DP, 6ES7 315-2EH14-0AB0, V3.2
IP-address 192,168,144,112
 Siemens switch, 4-port (2 RJ45, 2 LWL)
– Device name: SCALANCE-X202-2P IRT
– IP address: 192,168,144,166
 ET200S, IM-151-3 PN
– Device name: ET200-S
– IP address: 192,168,144,188
 FGEN-IOM88-x001
– Device name: not assigned, yet
– IP-address: not assigned, yet
 FGEN-XSG16-x001
– Device name: not assigned, yet
– IP-address: not assigned, yet

turck FGEN-AIM Series Specifications

General

Brand	turck
Model	FGEN-AIM Series
Category	I/O Systems
Language	English