turck FGEN-AIM Series - Downloading the I;O Configuration

Application example: FGEN for EtherNet/IP™ with Allen Bradley PLC and RS Logix 5000
D301271 1013 - FGEN - multi protocol8-8
8.2.2 Downloading the I/O configuration
1 If the configuration of the network is completed, it can be downloaded to the controller by using for
example the "Communication → Download" command.
2 In the "Download" dialog box, start the download by pressing the "Download" button.
3 If an error message is generated, warning, that the communication path can not be found, please
open the "Path" menu (see Figure 8-15:), select your controller and press "Set Project Path" (see
Figure 8-16:).
If the correct communication path is set, it is possible to download the configuration.
Figure 8-13:
Download of
the configura-
tion
Figure 8-14:
Error message
Figure 8-15:
Communica-
tion path
Figure 8-16:
Communica-
tion path