turck FGEN-AIM Series - Quick Connect Via Class Instance Attribute; Quickconnect Via Configuration Assembly

D301271 1013 - FGEN - multi protocol
7-5
QC - QuickConnect
QuickConnect via Configuration Assembly
The Configuration Assembly is part of the Assembly Class of the device and is defined during the
station's configuration in the RS Logix-software by Rockwell Automation.
Quick Connect via Class Instance Attribute
Activate QuickConnect via Class Instance Attribute using the following setting:
Figure 7-1:
Configuration
Assembly
Note
Further information about the configuration of FGEN-stations in the Rockwell software
RS Logix can be found in chapter 8, Application example: FGEN for EtherNet/IP™ with
Allen Bradley PLC and RS Logix 5000.
Class Instance Attribute Value
245
(0xF5)
1
(0x01)
12
(0x0C)
0: disabled (default)
1: enabled