turck FGEN-AIM Series - TCP;IP Interface Object (0×F5)

Implementation of EtherNet/IP™
D301271 1013 - FGEN - multi protocol7-22
7.3.5 TCP/IP Interface Object (0×F5)
The following description of the Ethernet Link Object is taken from the CIP specification, Vol. 2, Rev. 1.1
by ODVA & ControlNet International Ltd. and adapted to FGEN.
Class Attributes
Instance attributes
Table 7-11:
Class Attributes
Attr. No. Attribute name Get/
Set
Type Value
1 (0×01)
REVISION G UINT 1
2 (0×02)
MAX OBJECT INSTANCE G UINT 1
3 (0×03)
NUMBER OF INSTANCES G UINT 1
6 (0×06)
MAX CLASS IDENTIFIER G UINT 7
7 (0×07)
MAX INSTANCE ATTRIBUTE G UINT 6
Table 7-12:
Instance
attributes
Attr. No. Attribute name Get/
Set
Type Description
1 (0×01)
STATUS G DWORD Interface status (see page 7-23, Table 7-14:
Interface Status)
2 (0×02)
CONFIGURATION
CAPABILITY
G DWORD Interface Capability Flag (see page 7-23, Table
7-15: Configuration Capability)
3 (0×03)
CONFIGURATION
CONTROL
G/S DWORD Interface Control Flag (see page 7-24, Table 7-
16: Configuration Control)
4 (0×04)
PHYSICAL LINK
OBJECT
G STRUCT
Path size UINT Number of 16bit words: 0×02
Path Padded
EPATH
0×20, 0×F6, 0×24, 0×01
5 (0×05)
INTERFACE
CONFIGURATION
G Structure
of:
TCP/IP Network Interface Configuration (see
page 7-24)
Specify IPaddress G UDINT Current IP address
NETWORK MASK G UDINT Current network mask
GATEWAY ADDR. G UDINT Current default gateway
NAME SERVER G UDINT 0 = no name server address configured
NAME SERVER 2 UDINT 0 = no secondary name server address
configured
DOMAIN NAME G UDINT 0 = no Domain Name configured
6 (0×06)
HOST NAME G STRING 0 = no Host Name configured (see page 7-24)
12 (0×0C)
Quick Connect G/S BOOL 0 = deactivate
1 = activate