D301271 1013 - FGEN - multi protocol
7-23
Classes and Instances of the EtherNet/IP™-stations
Common services
Interface Status
The Status attribute indicates the status of the TCP/IP network interface.
Refer to the state diagram, Figure 7-2: TCP/IP object state diagram (acc. to CIP Spec., Vol.2, Rev. 1.1)
for a description of object states as they relate to the Status attribute.
Configuration Capability
The Configuration Capability indicates the device’s support for optional network configuration
capability.
Table 7-13:
Common services
Service code Class Instance Service name
01 (0x01)
yes yes Get_Attribute_All
02 (0x02)
no no Set_Attribute_All
14 (0x0E)
yes yes Get_Attribute_Single
16 (0×10)
no yes Set_Attribute_Single
Table 7-14:
Interface Status
Bit(s) Name Definition
0-3
Interface Configuration
Status
Indicates the status of the Interface Configuration attribute:
0 = The Interface Configuration attribute has not been
configured
1 = The Interface Configuration attribute contains valid
configuration.
2 to 15: reserved
4 to 31
reserved
Table 7-15:
Configuration
Capability
Bit(s) Name Definition Value
0
BOOTP Client The device is capable of obtaining its
network configuration via BOOTP.
1
1
DNS Client The device is capable of resolving host
names by querying a DNS server.
0
2
DHCP Client The device is capable of obtaining its
network configuration via DHCP.
1
To Next Page
Loading...
