turck FGEN-AIM Series - Page 79

D301271 1013 - FGEN - multi protocol
7-25
Classes and Instances of the EtherNet/IP™-stations
Figure 7-2:
TCP/IP object
state diagram
(acc. to CIP
Spec., Vol.2, Rev.
1.1)
Non-existent
Obtaining initial
configuration
Waiting
for
configuration
Applying
configuration
TCP/IP network
interface configured
Status = 0×00000001
Powerup/ Reset
BOOTP/DHCP
response received
BOOTP/DHCP
disabled and
stored config.
valid
Set_Attributes
request received
Change interface
configuration
Status =
0×00000000
Configuration applied
BOOTP OR
DHCP enabled
BOOTP/DHCP
disabled and
stored config. valid
Status =
0×00000000