turck FGEN-AIM Series - Example Program; Process Data Access; Setting Outputs

D301271 1013 - FGEN - multi protocol
8-11
Process data access
8.4 Process data access
8.4.1 Setting outputs
Example:
To set the outputs "0" and "1" at the station
FGEN-IOM88-5001, bit 0 bit 1 in output data word 1
(IOM88:O.Data [1]) have to be set (see above Figure 8-16:, I/O data mapping).
8.4.2 Example program
Figure 8-19:
Setting outputs
at FGEN-IOM88-
5001
Figure 8-20:
Example
program