Application example: FGEN for EtherNet/IP™ with Allen Bradley PLC and RS Logix 5000
D301271 1013 - FGEN - multi protocol8-12
1 The counter counts upwards.
2 The counter value is moved to the outputs of the FGEN-XSG16-4001, Word XSG16:0.Data [1].
3 The counter is set to "0" by setting the variable "xReset" (BOOL) to "1".
"xReset" has been defined and mapped to Bit IOM88:I.Data[1].0 by building an Alias in the
Main Program :
Figure 8-21:
Definition and
mapping of
xReset
To Next Page
Loading...
