Application example: FGEN for PROFINET with a Siemens S7
D301271 1013 - FGEN - multi protocol12-6
3 Chose the profile rack "RACK-300" for the Siemens CPU from the catalog and add it to the network
window.
4 After this, select the Siemens CPU from the hardware catalog. In this example a CPU 315-2 PN/DP,
version 6ES7 315-2EH14-0AB0 (V 3.2). is used.
5 In the dialog "Properties Ethernet Interface", define the IP address and the subnet mask for the S7
CPU
and add the subnet using the "New..." button.
Figure 12-6:
Selecting the
CPU
Figure 12-7:
Properties
Ethernet inter-
face
To Next Page
Loading...
