turck FGEN-AIM Series - Page 62

Implementation of EtherNet/IP™
D301271 1013 - FGEN - multi protocol7-8
Device Status
Common services
Table 7-4:
Device Status
Bit Name Definition
0 to 1
reserved Default = 0
2
Configured TRUE = 1
→ The application of the device has been configured
(≠ default-settings).
3
reserved Default = 0
4 to 7
Extended Device
Status
0011 = no I/O connection established
0110 = At least one I/O connection in run mode
0111 = At least one I/O connection established, all in IDLE
mode
All other settings = reserved
8 to 15
reserved Default = 0
Table 7-5:
Common services
Service code Class Instance Service name
01 (0x01)
yes yes Get_Attribute_All
Returns a predefined list of the object‘s attributes.
05 (0x05)
no yes Reset
Starts the reset service for the device.
14 (0x0E)
yes yes Get_Attribute_Single
Returns the contents of a specified attribute.
16 (0x10)
no no Set_Attribute_Single
Modifies a single attribute.