Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • D-45472 Mülheim an der Ruhr • Tel. +49 208 4952-0 • Fax +49 208 4952-264 • www.turck.com 3 /1105
Base modules
• Passive connection
components for
sensors and actuators
• Ensure independence of the chosen
connection method
• Provide a choice of M8, M12, M23 and
7/8'’ connectors
• Enable I/O connection via single, dual
or multicore cables
Electronic modules
• Digital, analogue, temperature, RS232,
SSI modules, CANopen interface and
various other function types
• Communication with the gateway
via the internal module bus
• Independent of the fieldbus type
Power feeding module
• Provide the field supply of
sensors and actuators
• Significantly extend the
system’s expansion
capabilities by
eliminating the need for
connectors with their
typically restricted contact
load capacity
• Allow construction of
potential groups to be
activated or disabled
according to specific
application needs
Software I/O-ASSISTANT
• Optional software tool to simplify
commissioning, configuration, set-up
and operation of the BL67 system
• Off-line planning and commissioning
of the BL67 station
• On-line parameterisation of the more
complex electronic and function
modules
• System set-up tool for checking
sensor connections and wiring
without a PLC
• Diagnostic aid during operation
• Automatic documentation of the
BL67 system configuration
Passive base mo-
dules with various
connection types
LEDs for status
display
Pluggable elec-
tronic modules
Flexibly extendable
up to max. 32 modules
• Independent of the chosen
connection method
• 2, 4, 8 or 16 channel versions
• Device diagnostics and
status display via LEDs
• Type-specific colour coding
• Guarantee fast and simple exchange
of electronic modules due to
stationary wiring
• Their mechanical coding avoids
interchange errors when connecting
the electronic modules
1
To Next Page
Loading...
