6 www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441 www.turck.com • 1-800-544-7769 • Fax: (763) 553-0708 • TURCK • Minneapolis, MN 55441 7
-> Bring the card back to your ashing station and hook it up to the Card Connecter (Note: If the Card Connecter is
touching the even connectors on the card it will not ash.)
SET UP THE UNIVERSAL PROGRAMMING DONGLE
-> Make sure the switch is to the right -> Hit reset before you begin programming in Memtool 3 (You also must hit the
reset switch before every card you program)
To Next Page
Loading...
