Turnstone Campfire - User Manual

R
©
2017 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
Page 1 of 10
939500545 Rev D
1
6x
Campfire
™
Big Table, Big Table with Trough, Big Table with Power
& Half Depth Big Table
Big Table
CAM LOCK NOTE:
If cam lock is installed high on the
surface, tap it down flush with the
surface. If that doesn't work,
replace part.
If cam lock is installed low into
the surface, screw cam pin out
to extend the length of the
cam pin.
Make sure the cam
lock is located parallel
to the side of the
surface as shown.
CAM LOCK
(See cam lock note)
Cam Lock Fastening
(The cam lock screw needs
to be turned 3/4 full turn
or 270
o
for complete
engagement.)
Big Table
Pages 1 - 2
Big Table
with Trough
Pages 3 - 5
Big Table
with Power
Pages 6 - 7
Half Depth
Big Table
Page 8

Summary

Big Table Assembly

Optional Mobile Cabinet Stop Brackets

Installation of optional brackets for mobile cabinet stop functionality.

Big Table with Trough Assembly

Big Table with Power Assembly

Half Depth Big Table Assembly

Important Safety Instructions

Operating and Maintenance

User-Maintenance Instructions

Information on resetting the circuit breaker for power restoration.

Grounding Instructions

Guidance on proper grounding for electrical safety and shock risk reduction.

Turnstone Campfire Specifications

General

Brand	Turnstone
Model	Campfire
Category	Indoor Furnishing
Language	English