8
Conrming a Successful Pairing (PS3)
Once the PBT has been paired with the PS3,
you’ll want to test its functionality.
1) Go to Settings > Accessory Settings > Audio
Device Settings.
2) Select “Turtle Beach PBT” as the Input and
Output Device and press X to conrm.
3) Click on “Microphone Level” and adjust the lev-
el of your chat output so that the bar graph barely
reaches the red area when you speak loudly.
4) Click “OK” to save.
Pairing with a Mobile Phone
Follow these steps to connect the PBT to a mobile phone for making and receiving calls.
The PBT must be powered off before you start.
1) On the PBT, press and hold the MFB for 5 seconds until the ashing LED changes from
blue to red—then release the button. A tone will also sound in the earpiece to indicate that
the PBT is in pairing mode.
2) On your mobile phone, activate the Bluetooth mode and search for Bluetooth devices as
described in its user manual.
3) When your phone is nished scanning, select “Turtle Beach PBT” from the list and follow
the prompts to connect.
4) Enter “0000” as the Pass Key and select “OK”. The PBT is now paired with your mobile phone.
Pairing the PBT Bluetooth Communicator (cont’d)
To Next Page
Loading...
