To Next PageTo Next Page
Need help?Do you have a question about the Tuthill 4007 and is the answer not in the manual?
General| Model | 4007 |
|---|---|
| Maximum Pressure | 15 PSIG |
| Port Size | 1.5 inches |
| Type | Positive Displacement Blower |
| Inlet Size | 1.5 inches |
| Outlet Size | 1.5 inches |
Specifies the oil volume required for the gear and drive ends of the blower.
Outlines the pressure, vacuum, speed, and temperature limits for safe operation.
Explains the importance and methods of lubricating the blower components.
Describes different methods for driving the blower, including direct and V-belt.
Instructions for safely connecting the motor and electrical components.
A comprehensive list of checks to perform before initial blower operation.
Steps to prevent moisture condensation, corrosion, and freezing during shutdown.
Details routine checks and oil changes for optimal blower performance.
Step-by-step guide for taking apart the blower for inspection or repair.
Instructions for putting the blower back together after disassembly.
Critical adjustment procedure for rotor lobe clearances during assembly.
Lists suitable lubricants based on operating conditions and temperature.
