To Next PageTo Next Page
Need help?Do you have a question about the Tuthill 4005 and is the answer not in the manual?
General| Size | 4005 |
|---|---|
| Pressure | Up to 15 PSIG |
| Port Size | 2" NPT |
| Construction | Cast Iron |
| Rotor Design | Two-Lobe |
| Drive Type | Belt drive |
| Applications | Pneumatic Conveying |
Details maximum pressure, vacuum, and temperature limits.
Covers hazards like explosive gases and guarding.
Verifies shaft movement and mounting integrity.
Recommends relief valves and warns about rotating parts.
Warnings on relief valves and hot surfaces.
Lockout/tagout and hearing protection warnings.
Instructions for filling oil reservoirs before operation.
Step-by-step instructions for filling oil reservoirs.
Covers hazards, guards, and operating limits.
Procedures to verify proper installation before startup.
Instructions for taking the blower apart.
Instructions for putting the blower back together.
