Tuthill 5003 User Manual

M-D Pneumatics
™
Rotary Positive Displacement Blower
CP Series
Models
2002 3002 4002 5003 6005 7006
2004 3003 4005 5006 6008 7011
3006 4007 5009 6015 7018
Grease Lubrication / Air Service
Splash Lubrication / Air Service
OPERATOR’S MANUAL
Manual 2017 Rev C p/n 2017
Tuthill Vacuum & Blower Systems www.tuthillvacuumblower.com 800.825.6937
WARNING: Do Not Operate Before Reading Manual
Operator’s Manual: Tuthill CP Series Rotary Positive Displacement Blower
Copyright © 2018 Tuthill Vacuum & Blower Systems
All rights reserved. 3roduct inIormation and speci¿cations subMect to change.

Tuthill 5003 Specifications

General

Brand	Tuthill
Model	5003
Category	Blower
Language	English

Summary

Description

Specifications

Installation

Safety

Highlights critical safety precautions during the installation process.

Lubrication

Outlines the factory preparation and initial filling procedures for blower lubrication.

Operation

Start-Up Checklist

A sequential guide for performing a safe and correct blower start-up.

Recommended Shutdown Procedure to Minimize Risk of Freezing or Corrosion

Disassembly and Reassembly

Disassembly of Blower

Instructions for safely dismantling the blower, including inspections.

Reassembly of Blower

Step-by-step procedures and tips for correctly reassembling the blower.

Adjusting Rotor Interlobe Clearance

Details on measuring and adjusting critical rotor clearances for optimal performance.

Troubleshooting

Loss of oil

Identifies common causes and solutions for blower oil loss.

Excessive bearing or gear wear

Addresses issues related to premature wear in bearings or gears.

Lack of volume

Knocking

Assembly Clearances

Recommended Lubricants

Parts List

Parts List for Model CP Series – Grease Lubrication / Air Service

Parts List for Model CP Series – Splash Lubrication / Air Service