Tuthill 7011 - User Manual

M-D Pneumatics
™
Rotary Positive Displacement Blower
CP Series
Models
2002 3002 4002 5003 6005 7006
2004 3003 4005 5006 6008 7011
3006 4007 5009 6015 7018
Grease Lubrication / Air Service
Splash Lubrication / Air Service
OPERATOR’S MANUAL
Manual 2017 Rev C p/n 2017
Tuthill Vacuum & Blower Systems www.tuthillvacuumblower.com 800.825.6937
WARNING: Do Not Operate Before Reading Manual
Operator’s Manual: Tuthill CP Series Rotary Positive Displacement Blower
Copyright © 2018 Tuthill Vacuum & Blower Systems
All rights reserved. 3roduct inIormation and speci¿cations subMect to change.

Summary

Lifting

Installation

General Installation Guidelines

Provides general guidelines for installing the blower.

Air Intake and Soft Foot

Safety Precautions

Outlines critical safety precautions during installation.

Lubrication and Filling Procedure

Details lubrication requirements and reservoir filling steps.

Piping Connections and Hazards

Piping Connections

Process Fluid Hazards

Addresses risks when handling hazardous process fluids.

Blockage or Restriction Warnings

Motor Drives

Setting V-Belt Tension

V-Belt Troubleshooting

Motor and Electrical Connections

Operation

General Operation Guidelines

Start-Up Checklist

A step-by-step checklist for initial blower start-up.

Stopping Procedure

Shutdown for Freezing;Corrosion Prevention

Maintenance

General Maintenance Overview

Regular Maintenance Schedule

Details a minimum recommended maintenance program.

Spare Parts

Long-Term Storage

Disassembly and Reassembly

Disassembly of Blower

Step-by-step instructions for disassembling the blower.

Reassembly of Blower

Instructions for reassembling the blower after service.

Adjusting Rotor Interlobe Clearance

Troubleshooting Guide

Assembly Clearances

Torque Chart

Recommended Lubricants

Special Tool Drawings

Parts List

Warranty Information

Tuthill 7011 Specifications

General

Model	7011
Manufacturer	Tuthill
Maximum Pressure	15 psi
Power Source	Electric
Type	Blower