To Next PageTo Next Page
Need help?Do you have a question about the Tuthill T850 and is the answer not in the manual?
Explains symbols and hazard levels used in the manual for clear communication.
Details critical safety steps and warnings for operation and maintenance procedures.
Pre-operation checklist to ensure safe installation and readiness of the blower.
Provides technical specifications for T850 and T1050 blower models.
Shows dimensional drawings and mounting details of the blower for installation planning.
Guidance on selecting PTO and maintaining engine speed for proper blower operation.
Proper installation and sizing of pressure relief valves and air filters.
Covers suction/discharge piping, mounting bracket, and check valve installation.
Details the placement and function of the vacuum valve for overheating protection.
Graphs illustrating blower performance under various operating conditions.
Step-by-step guide for filling blower oil reservoirs correctly to ensure proper lubrication.
Step-by-step guide for safely operating the blower unit according to manufacturer guidelines.
Outlines daily, weekly, monthly, and semiannual maintenance tasks for the blower.
Detailed steps for taking the blower apart for service or overhaul.
Instructions for reassembling the gear end of the blower.
Instructions for reassembling the drive end of the blower.
Method for measuring and adjusting rotor lobe clearances for proper function.
Table listing required clearances for T850 and T1050 models during assembly.
Visual representations of special tools required for blower assembly and maintenance.
Diagram showing the blower components and their assembly sequence.
Comprehensive list of all parts with quantities required for the blower.
List of recommended optional components for blower installation.
Outlines the warranty coverage, product types, and duration for the blower.
Form for recording blower operating data and product registration details.
General