Tuthill 6008 User Manual

M-D Pneumatics
™
Rotary Positive Displacement Blower
CP Series
Models
2002 3002 4002 5003 6005 7006
2004 3003 4005 5006 6008 7011
3006 4007 5009 6015 7018
Grease Lubrication / Air Service
Splash Lubrication / Air Service
OPERATOR’S MANUAL
Manual 2017 Rev C p/n 2017
Tuthill Vacuum & Blower Systems www.tuthillvacuumblower.com 800.825.6937
WARNING: Do Not Operate Before Reading Manual
Operator’s Manual: Tuthill CP Series Rotary Positive Displacement Blower
Copyright © 2018 Tuthill Vacuum & Blower Systems
All rights reserved. 3roduct inIormation and speci¿cations subMect to change.

Tuthill 6008 Specifications

General

Brand	Tuthill
Model	6008
Category	Blower
Language	English

Summary

Introduction

Conventions and Data Plate

Description

Technical Specifications

Provides detailed specifications including oil capacity, RPM, and weight.

Installation

General Installation Guidelines

Covers basic safety and installation requirements for the blower.

Mounting and Alignment

Motor and Drive System Installation

Lubrication Procedures

Instructions for filling oil reservoirs and proper lubrication before start-up.

Operation

General Operation Notes

Start-Up Checklist

Step-by-step checklist for safely starting the blower for the first time.

Maintenance

General Maintenance Practices

Disassembly and Reassembly

Blower Disassembly Steps

Detailed instructions for taking the blower apart for inspection or repair.

Blower Reassembly Steps

Guides on putting the blower back together after service.

Rotor Interlobe Clearance Adjustment

Troubleshooting

Assembly Clearances

Recommended Lubricants

Parts List

Warranty – Blower Products