To Next PageTo Next Page
Need help?Do you have a question about the Tuthill 6015 and is the answer not in the manual?
General| Manufacturer | Tuthill |
|---|---|
| Maximum Pressure | 15 psig |
| Type | Blower |
| Size | 6015 |
| Inlet/Outlet Size | 1.5 in. NPT |
Covers crucial safety warnings and precautions for blower installation.
Highlights critical dangers related to rotating parts and guarding during installation.
Explains initial lubrication procedures and safety for filling reservoirs.
Critical warnings concerning lubrication changes and disposal.
Emphasizes installer responsibility for safe handling of process gases.
Outlines essential safety precautions before and during blower operation.
A step-by-step guide to ensure proper setup before initial blower startup.
Detailed steps for checking motor rotation and initial operation.
Details daily, weekly, and monthly checks for blower upkeep.
Step-by-step guide for taking the blower apart for inspection or repair.
Inspects gears for teeth damage, wear, and other abnormalities.
Procedures for removing drive and driven gears using pullers.
Methods for pressing or tapping rotors out of the end plates.
Procedures for tapping out bearings and removing seals from end plates.
Initial steps for reassembling the blower, including seals and bearings.
Specifies critical clearance measurements for proper blower reassembly.
Procedures for installing bearings and shafts onto rotors.
Guide to measuring and adjusting interlobe clearances using feeler gauges.
Addresses common causes and remedies for oil loss and wear problems.
Solutions for low output volume and knocking noises in the blower.
