Tuthill 3006 User Manual

M-D Pneumatics
™
Rotary Positive Displacement Blower
CP Series
Models
2002 3002 4002 5003 6005 7006
2004 3003 4005 5006 6008 7011
3006 4007 5009 6015 7018
Grease Lubrication / Air Service
Splash Lubrication / Air Service
OPERATOR’S MANUAL
Manual 2017 Rev C p/n 2017
Tuthill Vacuum & Blower Systems www.tuthillvacuumblower.com 800.825.6937
WARNING: Do Not Operate Before Reading Manual
Operator’s Manual: Tuthill CP Series Rotary Positive Displacement Blower
Copyright © 2018 Tuthill Vacuum & Blower Systems
All rights reserved. 3roduct inIormation and speci¿cations subMect to change.

Tuthill 3006 Specifications

General

Brand	Tuthill
Model	3006
Category	Blower
Language	English

Summary

01 Introduction to Tuthill CP Series Blowers

04 Description of CP Series Blowers

Specifications

05 Installation of Tuthill Blowers

General Installation Guidelines

Covers initial safety and general installation requirements.

Soft Foot Condition

Lubrication

06 Operation of Tuthill Blowers

General Operating Procedures

Outlines initial checks and safe operating practices.

Start-Up Checklist

Step-by-step checklist for initial blower start-up.

07 Maintenance of Tuthill Blowers

General Maintenance Practices

Overview of routine checks and oil changes.

08 Disassembly and Reassembly

Blower Disassembly Steps

Detailed instructions for taking the blower apart.

Blower Reassembly Steps

Detailed instructions for putting the blower back together.

Adjusting Rotor Interlobe Clearance

09 Troubleshooting Guide

12 Recommended Lubricants