To Next PageTo Next Page
Need help?Do you have a question about the Tuthill Qx 3200 Series and is the answer not in the manual?
General guidelines for safe operation and maintenance of the equipment.
Information regarding safety instruction tags attached to the unit.
Important safety measures to minimize the chances of injury during operation.
Welcome and overview of the Qx Rotary Positive Displacement Air Blower.
Description of how the Qx blowers function and their key operational aspects.
Specifies the critical limits for temperature, speed, and pressure for blower operation.
Instructions for removing protective materials from the blower.
Details hazards like hot surfaces and rotating parts.
Recommended procedures for initial installation and startup.
Requirements for a solid, level floor and adequate frame support.
Guidance on selecting an appropriate installation location for the blower.
Information on avoiding stress from mounting and piping to prevent damage.
Guidelines for supplying clean air to the blower and avoiding restrictions.
Explains direct drive connection for motor to blower.
Details V-belt drive installation, alignment, and tensioning.
Instructions for wiring the motor and other electrical devices.
Recommendations for using relief valves to protect against pressure or vacuum.
Guidance on blower piping, including silencers and internal cleanliness.
Step-by-step instructions for filling blower oil reservoirs.
Addresses common questions about lubricant function and maintenance.
Steps for initial operation and checks before full load operation.
Procedure to protect the blower from moisture, corrosion, and freezing.
Instructions for preparing the blower for extended periods of storage.
Outlines daily, weekly, and monthly maintenance tasks.
Guidance on inspection and obtaining parts for blower service.
Information on factory service and returning units for repair.
Step-by-step instructions for disassembling the 3200 and 4600 models.
General information and kits for assembling 3200 and 4600 models.
Details assembly steps for the gear end.
Details assembly steps for the drive end.
Refers to factory for Qx 6000 model instructions.
General